WRT160NL
Quick info
default LAN ip: 192.168.1.1/24
web user: admin
web password: 
Hardware
| Architecture: | Atheros AP81 |
|---|---|
| CPU | Atheros 9130-BC1E 400 Mhz |
| Ram | Samsung K4H561638J-LCCC 32 MiB |
| Flash | cFeon EN25P64 8 MiB |
| Network | 4×10/100 |
| WiFi | Atheros 9102 802.11 b/g/n (integrated) |
| Ethernet | RTL8306SD |
| USB | Yes |
| Serial | Yes |
| JTag | Yes |
serial console
Serial settings: 115200,8,n,1, no flow control - not confirmed.
| Pin | function |
|---|---|
| 1 | 3.3V |
| 2 | TX |
| 3 | RX |
| 4 | NC |
| 5 | GND |
http://wiki.openwrt.org/oldwiki/openwrtdocs/customizing/hardware/serial_console?s
JTAG
There is a micro-JTAG connector present but so far no one has identified the header-size or attempted to access it.
GPIO
| pin | function |
|---|---|
| 6 | LED_WLAN |
| 7 | BTN_WPS |
| 8 | LED_WPS_BLUE |
| 9 | LED_WPS_AMBER |
| 14 | LED_POWER |
| 21 | BTN_RESET |
Buttons
There are 2 buttons. They are Reset and WiFi Protected Setup. The buttons can be used with hotplug events. E. g. [#wifitoggle WiFi toggle].
| BUTTON | Event |
|---|---|
| Reset | reset |
| WiFi Protected Setup | wps |
links
- http://wiki.openwrt.org/inbox/wrt160nl - open wrt page
- https://forum.openwrt.org/viewtopic.php?id=20298&p=1 - exploration thread in OpenWrt forums